Acing the ɫèAV English International Certificate: 10 essential revision strategies

Amy Malloy
Amy Malloy
Three young people sat outside holding binders with notes and examining them

Every student and teacher knows how important revision is ahead of exams. It’s not only about how much students revise and practice – it’s also about how they do it.

So, if you or your students are preparing for the ɫèAV English International Certificate (PEIC), here are ten top revision strategies to help. All of the advice below can be applied to all six levels from A1 to Level 5.

Know what to expect

You can download detailed 'Functions and Notions' guides for all levels. These will give you a very clear idea of the language we expect students to produce at each level. You can download the test guides for each level as well as practice tests and other important documents.

Work on synonyms and paraphrasing

Often in the reading and listening tasks, the answers will be synonyms or paraphrased versions of the question. Working with synonyms and paraphrasing in class or at home is a great way to expand vocabulary and help be better prepared for the test. In the A1 test students are expected to show only “a very basic repertoire of words and simple phrases”, but as they progress through the levels, more range is expected in vocabulary and grammar.

Focus on sentence structure

As well as helping to improve grammatical control, taking a close look at sentence structure will really benefit you or your learners, especially in the dictation task (section 2). Identifying the tense of a verb or whether they need to use this or these, for example, will help you avoid losing points unnecessarily. It’s also important that they check sentences are complete and correct in the gap-fill tasks at higher levels (Sections 3 and 7), so always tell them/make sure to re-read the whole sentence for every question.

Create a list of errors

We all know that learners often make the same mistakes, so a good idea is for them to create a personalized errors list.

Teacher: Each time you do a writing task, dictation, or gap fill, have them write down the typical mistakes they make. Then, next time, tell them to check their work with their list before you correct it.

Self-learner: Make sure to take note of the mistakes you make and put them into a list, taking care to avoid them in the future.

Use a highlighter

Get yourself or your students into the habit of highlighting or underlining keywords in questions every time you do a task. This helps learners focus on the information they need to listen or look for and also encourages them to subconsciously start thinking about vocabulary related to the topic. This could be practiced by downloading a sample exam and practicing underlining the keywords.

Say more

For the spoken test, train your students to expand their answers and make sure they feel comfortable talking about themselves. At higher levels, give your learners language so they can support their point of view. Remind them that the topics may be more complex, but they still need to be able to give an opinion about them.

Listen to as much as possible

In the listening sections, learners will hear a variety of different accents from people of different ages, so it’s important to expose them/yourself to lots of different voices in preparation for the test. That might be a parent talking to a child or an elderly person in a shop, so the more experience someone has listening to different dialogues, the better. As well as the listening activities in coursebooks, encourage students to listen to podcasts or watch videos on YouTube in their free time.

Be (in)formal

In the writing and role play, it’s important for learners to know what level of formality is required for each task. They should have lots of practice in written and spoken structures to deal with different types of people, such as a friend, a shop assistant or a bank manager. Also remind them to make the most of the 15 seconds they have to prepare the role play in the spoken test and think about the type of structures and vocabulary they’ll need.

Keep to the word limit

For each of the writing tasks, there is a ‘tolerated word limit’ which allows students to be a few words over or under. However, you should train learners to keep an eye on how much they are writing so they become familiar with the required task length. Students can save time calculating exactly how many words they’ve written by choosing an average line from their writing, counting the number of words on that line and then multiplying it by the total number of full lines.

It’s also essential students practice writing under exam conditions so they get used to completing the tasks quickly. Be sure to include some exam practice in class or as a self-learner, try to practice with a past exam paper in a quiet place, replicating exam conditions as closely as you can.

Check the answers again

While our final tip isn’t really a revision strategy, it’s certainly very helpful for students to bear in mind when applying all of the other revision strategies. It is essential that students leave themselves time at the end of the test to check through their paper: Have they filled in every question? Are the sentences complete in the gap fill tasks? Have they checked their writing and remembered their frequent mistakes? Are all the answers clear and easy to read? One final check-through could make all the difference!

With these top tips, you or your students will be more than ready for the test. Good luck!

More blogs from ɫèAV

  • A woman with glasses thinking with her hand to her mouth, stood in front of a pink background

    5 of the strangest English phrases explained

    By Steffanie Zazulak

    Here, we look at what some of the strangest English phrases mean – and reveal their origins…

    Bite the bullet

    Biting a bullet? What a strange thing to do! This phrase means you’re going to force yourself to do something unpleasant or deal with a difficult situation. Historically, it derives from the 19th century when a patient or soldier would clench a bullet between their teeth to cope with the extreme pain of surgery without anesthetic. A similar phrase with a similar meaning, “chew a bullet”, dates to the late 18th century.

    Use it: “I don’t really want to exercise today, but I’ll bite the bullet and go for a run.”

    Pigs might fly

    We all know that pigs can’t fly, so people use this expression to describe something that is almost certain never to happen. It is said that this phrase has been in use since the 1600s, but why pigs? An early version of the succinct “pigs might fly” was “pigs fly with their tails forward”, which is first found in a list of proverbs in the 1616 edition of John Withals’s English-Latin dictionary, A Shorte Dictionarie for Yonge Begynners: “Pigs fly in the ayre with their tayles forward.” Other creatures have been previously cited in similar phrases – “snails may fly”, “cows might fly”, etc, but it is pigs that have stood the test of time as the favored image of an animal that is particularly unsuited to flight! This phrase is also often used as a sarcastic response to mock someone’s credulity.

    Use it: “I might clean my bedroom tomorrow.” – “Yes, and pigs might fly.”

    Bob’s your uncle

    Even if you don’t have an uncle called Bob, you might still hear this idiom! Its origin comes from when Arthur Balfour was unexpectedly promoted to Chief Secretary for Ireland by the Prime Minister of Britain, Lord Salisbury, in 1900. Salisbury was Arthur Balfour’s uncle (possibly his reason for getting the job!) – and his first name was Robert. This phrase is used when something is accomplished or successful – an alternative to “…and that’s that”.

    Use it: “You’re looking for the station? Take a left, then the first right and Bob’s your uncle – you’re there!”

    Dead ringer

    This phrase commonly refers to something that seems to be a copy of something – mainly if someone looks like another person. The often-repeated story about the origin of this phrase is that many years ago, people were sometimes buried alive because they were presumed dead – when actually they were still alive. To prevent deaths by premature burial, a piece of string would supposedly be tied to the finger of someone being buried – and the other end would be attached to a bell above ground. If the person woke up, they would ring the bell – and the “dead” ringer would emerge looking exactly like someone buried only a few hours ago! Other stories point to the practice of replacing slower horses with faster horses – “ringers”. In this case, “dead” means “exact”.

    Use it: “That guy over there is a dead ringer for my ex-boyfriend.”

    Off the back of a lorry

    This is a way of saying that something was acquired that is probably stolen, or someone is selling something that’s stolen or illegitimate. It can also be used humorously to emphasize that something you bought was so cheap that it must have been stolen! “Lorry” is the British version – in the US, things fall off the back of “trucks”. An early printed version of this saying came surprisingly late in The Times in 1968. However, there are many anecdotal reports of the phrase in the UK from much earlier than that, and it is likely to date back to at least World War II. It’s just the sort of language that those who peddled illegal goods during and after WWII would have used.

    Use it: “I can’t believe these shoes were so cheap – they must have fallen off the back of a lorry.”

  • Two ladies in a pottery studio, one with a clipboard, both looking at a laptop together

    11 ways you can avoid English jargon at work

    By Steffanie Zazulak

    From “blue-sky thinking” to “lots of moving parts”, there are many phrases used in the office that sometimes seem to make little sense in a work environment. These phrases are known as ‘work jargon’ – or you might hear it referred to as ‘corporate jargon’, ‘business jargon’ or ‘management speak’. It’s a type of language generally used by a profession or group in the workplace, and has been created and evolved over time. And whether people use this work jargon to sound impressive or to disguise the fact that they are unsure about the subject they are talking about, it’s much simpler and clearer to use plain English. This will mean that more people understand what they are saying –both fluent and second-language English speakers.

    The preference for plain English stems from the desire for communication to be clear and concise. This not only helps fluent English speakers to understand things better, but it also means that those learning English pick up a clearer vocabulary. This is particularly important in business, where it’s important that all colleagues feel included as part of the team and can understand what is being said. This, in turn, helps every colleague feel equipped with the information they need to do their jobs better, in the language they choose to use.

    Here, we explore some of the most common examples of English jargon at work that you might hear and suggest alternatives you can use…

    Blue-sky thinking

    This refers to ideas that are not limited by current thinking or beliefs. It’s used to encourage people to be more creative with their thinking. The phrase could be confusing as co-workers may wonder why you’re discussing the sky in a business environment.

    Instead of: “This is a new client, so we want to see some blue-sky thinking.”

    Try saying: “This is a new client, so don’t limit your creativity.”

    Helicopter view

    This phrase is often used to mean a broad overview of the business. It comes from the idea of being a passenger in a helicopter and being able to see a bigger view of a city or landscape than if you were simply viewing it from the ground.Second-language English speakers might take the phrase literally, and be puzzled as to why someone in the office is talking about taking a helicopter ride.

    Instead of: “Here’s a helicopter view of the business.”

    Try saying: “This is a broad view of the business.”

    Get all your ducks in a row

    This is nothing to do with actual ducks; it simply means to be organized. While we don’t exactly know the origin of this phrase, it probably stems from actual ducklings that walk in a neat row behind their parents.

    Instead of: “This is a busy time for the company, so make sure you get all your ducks in a row.”

    Try saying: “This is a busy time for the company, so make sure you’re as organized as possible.”

    Thinking outside the box

    Often used to encourage people to use novel or creative thinking. The phrase is commonly used when solving problems or thinking of a new concept. The idea is that, if you’re inside a box, you can only see those walls and that might block you from coming up with the best solution.

    Instead of: “The client is looking for something extra special, so try thinking outside the box.”

    Try saying: “The client is looking for something extra special, so try thinking of something a bit different to the usual work we do for them.”

    IGUs (Income Generating Units)

    A college principal alerted us to this one – it refers to his students. This is a classic example of jargon when many more words are used than necessary.

    Instead of: “This year, we have 300 new IGUs.”

    Try saying: “This year, we have 300 new students.”

    Run it up the flagpole

    Often followed by “…and see if it flies” or “…and see if anyone salutes it”, this phrase is a way of asking someone to suggest an idea and see what the reaction is.

    Instead of: “I love your idea, run it up the flagpole and see if it flies.”

    Try saying: “I love your idea, see what the others think about it.”

    Swim lane

    A visual element – a bit like a flow chart –  that distinguishes a specific responsibility in a business organization. The name for a swim lane diagram comes from the fact that the information is broken up into different sections – or “lanes” – a bit like in our picture above.

    Instead of: “Refer to the swim lanes to find out what your responsibilities are.”

    Try saying: “Refer to the diagram/chart to find out what your responsibilities are.”

    Bleeding edge

    A way to describe something that is innovative or cutting edge. It tends to imply an even greater advancement of technology that is almost so clever that it is unbelievable in its current state.

    Instead of: “The new technology we have purchased is bleeding edge.”

    Try saying: “The new technology we have purchased is innovative.”

    Tiger team

    A tiger team is a group of experts brought together for a single project or event. They’re often assembled to assure management that everything is under control, and the term suggests strength.

    Instead of: “The tiger team will solve the problem.” 

    Try saying: “The experts will solve the problem.” 

    Lots of moving parts

    When a project is complicated, this phrase is sometimes used to indicate lots is going on.

    Instead of: “This project will run for several months and there are lots of moving parts to it.”

    Try saying: “This project will run for several months and it will be complicated.”

    A paradigm shift

    Technically, this is a valid way to describe changing how you do something and the model you use. The word “paradigm” (pronounced “para-dime”) is an accepted way or pattern of doing something. So the “shift” part means that a possible new way has been discovered. Second-language English speakers however, might not be familiar with the meaning and might be confused about what it actually means.

    Instead of: “To solve this problem, we need a paradigm shift.”

    Try saying: To solve this problem; we need to think differently.”