8 first lesson problems and solutions for young learner classes

Joanna Wiseman
Two young girls sat at a school desk reading a book

The first class with a new group of young learners can be a nerve-wracking experience for teachers, old and new. Many of us spend the night before thinking about how to make a positive start to the year, with a mixture of nerves, excitement, and a desire to get started. However, sometimes things don’t always go as expected, and it is important to set a few ground rules in those early lessons to ensure a positive classroom experience for all throughout the academic year.

Let’s look at a few common problems that can come up and how best to deal with them at the start of the school year.

First lesson problems and solutions for young learner classes
Play
Privacy and cookies

By watching, you agree ɫèAV can share your viewership data for marketing and analytics for one year, revocable by deleting your cookies.

1. Students are not ready to start the class

How the first few minutes of the class are spent can greatly influence how the lesson goes. Students can be slow to get out their equipment and this can cause a lot of time wasting. To discourage this, start lessons with atimed challenge.

  • Tell students what you want them to do when they come into class, e.g., sit down, take out their books and pencil cases, and sit quietly, ready for the lesson to start.
  • Time how long it takes for everyone to do this and make a note. Each day, do the same.
  • Challenge students to do thisfasterevery day. You could provide a goal and offer a prize at the end of the trimester if they reach it, e.g., be ready in less than a minute every day.

2. Students speak first language (L1) in class

One of the most common classroom management issues primary teachers face is getting them to speak English. However, young learners may need to speak their mother tongue occasionally, and a complete ban on L1 is often not the best solution. But how can we encourage students touse English wherever possible?

  • Tell students they have toask permissionto speak in L1 if they really need to.
  • 3-word rule — Tell students that they can use a maximum ofthree wordsin L1 if they don’t know them in English.
  • WriteENGLISHon the board in large letters. Each time someone speaks in L1, erase a letter. Tell students that each letter represents time (e.g., 1 minute) to play a game or do another fun activity at the end of the lesson. If the whole word remains, they can choose a game.

3. Students don’t get on with each other

It is only natural that students will want to sit with their friends, but it is important that students learn to work with different people. Most students will react reasonably if asked to work with someone new, but occasionally conflicts can arise. To help avoid uncomfortable situations doteam building activities, such as those below, at the beginning of the school year, and do them again throughout the year whenever you feel that they would be beneficial.

  • Give students an icebreaker activity, such asFind a Friend bingoto help students find out more about each other.
  • Help students learn more about each other by finding out aboutwhat they have in common.
  • Balloon race. Have two or more teams with an equal number of students stand in lines. Give each team a balloon, which they have to pass to the next student without using their hands. The first team to pass the balloon to the end of the line wins.
  • Team letter/word building. Call out a letter of the alphabet and have pairs of students form it with their bodies, lying on the floor. When students can do this easily, call out short words, e.g.cat,and have the pairs join up (e.g. three pairs = group of six) and form the letters to make the word.

4. Students don’t know what to do

When the instructions are given in English, there will inevitably be a few students who don’t understand what they have to do. It is essential to giveclear, concise instructionsand tomodel the activitybefore you ask students to start. To check students know what to do and clarify any problems:

  • Have one or more studentsdemonstrateusing an example.
  • Have one studentexplainthe task in L1.
  • Monitorthe task closely in the first few minutes and check individual students are on the right track.

5. A student refuses to participate/do the task

This is a frequent problem that can have many different causes. In the first few lessons, this may be shyness, but it is important to identify the cause early on to devise an effective strategy. A few other causes might include:

  • Lack of language required to respond or do the task. Provide differentiation tasks or scaffolding to help students with a lower level complete the task or have them respond in a non-oral way.
  • Low self-confidence in their ability to speak English. Again, differentiation and scaffolding can help here. Have students work in small groups or pairs first, before being asked to speak in front of the whole class.
  • Lack of interest or engagement in the topic.If students aren’t interested, they won’t have anything to say. Adapt the topic or task, or move on.
  • External issues e.g., a bad day, a fight with a friend, physical problems (tiredness/hunger/thirst). Talk to the student privately to find out if they are experiencing any problems. Allow them to “pass” on a task if necessary, and give them something less challenging.

It is importantnot to forcestudents to do something they don’t want to do, as this will cause a negative atmosphere and can affect the whole class. At the end of the day, if a student skips one or two tasks, it won’t affect their achievement in the long run.

6. Students ask for repeated restroom/water breaks

It only takes one student to ask to go to the restroom before the whole class suddenly needs to go. This can cause disruption and stop the flow of the lesson. To avoid this, make sure you have rules in place concerning restroom breaks.

  • Make sure students know to go to the restroombefore the lesson.
  • Have students bring in their ownwater bottles. You can provide a space for them to keep their bottles (label them with student names) in the classroom and have students fill them daily at the drinking fountain or faucet.
  • Find out if anyone has anyspecial requirementsthat may require going to the restroom.
  • Provide “brain breaks” at strategic points in the lesson when students become restless.

7. Students don’t have the required materials

  • Provide parents witha list of materialsstudents need on the first day.
  • Ifspecial materialsare required in a lesson, give students a note to take home or post a message on the school platformseveral days before.
  • Don’t blame the student—whether they have a good reason or not for turning up to class empty-handed, making a child feel guilty will not help. Write a note for parents explaining why bringing materials to class is important.

8. Students are not listening/talking

If you have a boisterous class, it can be challenging to get their attention. Set up asignalthat you will use when you want them to pay attention to you. When they hear or see the signal, students should stop what they are doing and look at you. Some common signals are:

  • Raising your hand. When students see you raise your hand, they should raise their hands and stop talking. Wait until everyone is sitting in silence with their hands raised. This works well with older children and teenagers.
  • Call and responseattention-getters. These are short phrases that prompt students to respond in a certain way, e.g.

Teacher: 1 2 3, eyes on me.

Students: 1 2 3, eyes on you.

Introduce a new attention-getter every few weeks to keep it fun. You can even have your students think up their own phrases to use.

  • Countdowns. Tell students what you want them to do and count backwards from ten to zero, e.g.

When I get to zero, I need you all to be quiet and look at me. 10, 9, 8 …

Keep your voice low and speak calmly. This will encourage students to stop talking and bring down excitement levels.

  • A short song or clapping rhythm. With younger children, it is effective to use music or songs for transitions between lesson stages so they know what to do at each stage. For primary-aged children, clap out a rhythm and have them repeat it. Start with a simple rhythm, then gradually make it longer, faster, or more complex.

More blogs from ɫèAV

  • A teacher sat at a table with students helping them work

    GSE Teacher Toolkit: Teaching mixed ability classes

    By Sara Davila
    Reading time: 4 minutes

    One of the biggest challenges for language teachers is teaching a mixed ability class. Students with different levels and abilities will always be present in our classrooms. So, how can we use the to improve mixed ability teaching? Let’s find out.

    How to teach mixed-ability classes

    Differentiated instruction is the best way to address the challenges of mixed ability classrooms. This is a method that helps teachers adjust aspects of the curriculum to match the different levels ofstudents.*This practice ensures that all learners are meeting course outcomes, even though their learning experience may be varied anddifferent.

    In order to differentiate instruction and support students with different needs, teachers can change:

    • the content being taught
    • the process used to teach
    • the product students create
    • the environment where learning takes place

    Adjusting the content tends to be the most obvious way to support learners. So, teachers who want to engage with differentiated instruction in mixed ability classrooms often find themselves producing a lot of content. This is greatas a way tosupport learners. However, creating new content or leveling existing content is time-consuming, and it can become a real challenge for teachers.

    Content vs process

    Instead of adjusting your content, you can use the GSE Teacher Toolkit to adjust your process. When you’re not creating lots of new content, you’ve got more time to consider how to teach new language to your students and how they can show what they’ve learned.The GSE Teacher Toolkit helps teachers to focus on the process and language production of learners, rather than the content you are teaching.

    This means less work for you, and more engagement from your students, no matter what their level is. And the GSE Teacher Toolkit can help you understand the skills we can expect students to demonstrate. So how does this work in practice? Let’stake a look.

  • Teacher stood at the front of the class writing on a interactive whiteboard

    GSE Teacher Toolkit: Planning a communicative grammar lesson

    By Sara Davila
    Reading time: 4 minutes

    Planning grammar lessons with the GSE Teacher Toolkit

    Grammar is one of the core areas of language teaching. Often, new teachers are nervous about teaching it, but sooner or later, all English teachers will have to get to grips with it. Whether you love or hate teaching grammar to your students, the makes planning a successful grammar lesson easier than ever.

    When it comes to planning a grammar-focused lesson, there are two main strategies to choose from: a communicative approach or a focus-on-form approach. The communicative approach is more commonly used.

    So, let’s have a look at how the GSE Teacher Toolkit can help you plan a communicative grammar lesson that is effective and engaging for your students.

    Teaching communicative grammar

    When you’re planning a grammar lesson, you want to be sure there is a reason for students to use the grammar point that you’re going to teach. That way, your students will be more motivated to learn the form and practise using it correctly.

    Using and applying grammar generally requires producing something. That’s why grammar, as an enabling skill, is often aligned to speaking and writing, the productive skills. When you want your students to use or produce a particular grammar form, you can begin by looking for the associated skills in speaking and writing.

    Choosing a skill to teach

    Imagine that you have a class that is learning at an A2 level (35 - 40 on the GSE range). You’ll want to help them work towards A2+/B1. So, it’s a good idea to plan lessons around skills that are in your target GSE range to push their progress.

    In order to plan an A2+ range speaking class, you can filter the GSE Teacher Toolkit to look in your target learning range for specific skills to teach:

  • Students sat at a desk looking at a textbook together, with a teacher pointing to it

    Real-world English: How GSE Job Profiles bridge learning and work

    By Sara Davila
    Reading time: 5 minutes

    Did you know that improving your English proficiency can increase earning potential by up to 50% and safeguard your career against AI? Recent research by ɫèAV highlights that English is not just a skill but a career-defining advantage in today’s globalized workplace. For millions of adult learners, the journey from the classroom to the workplace requires more than general conversational abilities—it’s about gaining targeted, job-ready skills as quickly as possible. For English language educators, understanding what “jDz-𲹻” English is and how to identify “jDz-𲹻” skills can provide a significant advantage in ensuring learners are prepared to communicate effectively and collaborate with their future coworkers.

    That’s where the Global Scale of English (GSE) Job Profiles comes in. For educators and program developers, it offers a bridge between real-world job skills and the English learners need to perform them. Whether you’re creating programs for nursing assistants, hospitality workers, or IT professionals, this tool ensures that learners build the precise English skills they need to thrive in their roles.

    Let’s walk through how to create a GSE Job Profile and explore its practical use for building programs that align with today’s professional realities.